Materials
uPVC or aluminium windows: price, insulation and looks compared

In short
- uPVC is the best value for most Dutch homes: lower price, very good insulation and no painting.
- Aluminium is stronger and slimmer. It wins for very large glass, minimal sightlines and modern architecture.
- In our price list an aluminium tilt and turn window starts at €848, a uPVC one of 100 × 120 cm at €543; sliding doors start at €3,819 in aluminium and €2,408 in uPVC, all incl. VAT.
- Both qualify for the same ISDE subsidy, because the subsidy is based on the glass.
- Many homes combine both: uPVC windows and an aluminium lift and slide door at the back.
uPVC (in Dutch: kunststof) and aluminium are the two most common materials for new windows in the Netherlands, next to timber. They look similar at first sight, especially in anthracite grey, but they differ in price, insulation, sightlines, maintenance and what they are good at. This guide compares them on every point that matters for a Dutch home, using our own 2026 prices. Timber is covered briefly in our main guide.
The short answer
| uPVC | Aluminium | |
|---|---|---|
| Price | Lower | Roughly 1.3 to 1.6 times higher |
| Insulation (frame) | Very good, multi-chamber profile | Good, with a thermal break |
| Sightlines | Wider frames | Slimmer frames |
| Large glass and sliding doors | Good up to about 3 m | Best for very large panes |
| Maintenance | Cleaning only | Cleaning only |
| Lifespan | 40 to 50 years | 50 years or more |
| Look | Classic Dutch block frame, wood grain possible | Modern, crisp lines |
| ISDE subsidy | Same | Same |
Price compared
These are "from" prices in our 2026 price list, incl. 21% VAT, excl. installation. The uPVC prices are for the stated size in white with HR++ glass; the aluminium prices are the starting prices per type. For the same size and colour, aluminium usually comes out about 30 to 60% higher than uPVC.
| Product | uPVC from | Aluminium from |
|---|---|---|
| Tilt and turn window | €543 (100 × 120 cm) | €848 |
| Fixed window | see price list | €264 |
| 3-section window with tilt and turn | €1,094 (240 × 140 cm, Comfort) | €1,189 |
| Sliding door | €2,408 | €3,819 |
| Front door with frame | €1,592 | €2,063 |
| French doors (garden doors) | €2,858 | €4,926 |
Installation costs the same for both: €695.75 per window, €1,324.95 per door and €2,171.95 per sliding door incl. VAT. For a whole house the difference in material adds up: on a terraced house with six windows and two doors, aluminium typically costs a few thousand euros more. Exact prices per size are on our prices page.
Insulation and comfort
Aluminium conducts heat very well, which is why modern aluminium frames have a thermal break: an insulating strip between the inner and outer part of the profile. uPVC conducts heat badly by nature, and its profiles have several hollow chambers that insulate further.
| Frame type | Typical frame U-value (Uf) | Whole window (Uw) with triple glass |
|---|---|---|
| uPVC 84 mm, 6 chambers (Ideal 7000 NL) | about 1.0 to 1.1 W/m²K | about 0.8 to 0.9 W/m²K |
| uPVC 94 mm (Ideal 8000 NL) | about 0.9 to 1.0 W/m²K | down to about 0.8 W/m²K |
| Aluminium with thermal break, standard | about 1.6 to 2.2 W/m²K | about 1.0 to 1.2 W/m²K |
| Aluminium, high insulation systems | about 1.0 to 1.4 W/m²K | about 0.8 to 1.0 W/m²K |
In practice both are far better than old timber or old aluminium frames. The glass matters more than the frame, which is why the subsidy is based on the glass. If you want the very best insulation for the money, uPVC with triple glass is hard to beat. Read more on glass in HR++ or triple glazing.
Looks and sightlines
This is where aluminium wins. Aluminium is stronger, so the profiles can be narrower for the same window size. A uPVC frame plus sash is typically about 110 to 130 mm wide in view; slim aluminium systems go well below 100 mm, and special systems for monuments or minimalist sliding doors even less. Less frame means more glass and more light.
uPVC has its own strength in looks: the Dutch block frame. Profiles such as Ideal 7000 NL are designed to look like a traditional Dutch timber frame, with a square block frame and a sash that sits flush or with a classic step. In a street of Dutch houses from the 1930s to the 1980s, that often fits better than a thin modern frame.
Colours and finishes
| uPVC | Aluminium | |
|---|---|---|
| How the colour is applied | Foil laminated on the profile, smooth or wood grain | Powder coating in any RAL colour, smooth, matt or structured |
| Colour range | Dozens of standard foils, two-tone possible | Practically unlimited |
| Wood look | Very convincing wood grain foils | Possible, less common |
| Price of colour | About 10 to 25% extra, depending on one or two sides | Often included or a small extra |
Anthracite grey outside and white inside is the most chosen combination in both materials. See the colours we offer on our window frames page.
Maintenance and lifespan
Both materials do not need painting. Clean the frames twice a year with water and a mild cleaner, clean the drainage holes and give the hardware and seals a drop of oil or silicone spray once a year. With that, uPVC lasts 40 to 50 years and aluminium 50 years or more. The hardware (hinges, locks) and the seals are the parts that wear and can be replaced. On the coast, aluminium needs a coating suited to salt air; uPVC is not affected by salt.
Strength, large glass and security
For very large panes, very tall doors and sliding doors wider than about 3 to 4 metres, aluminium is the better material: it carries the weight of large triple glass with slimmer profiles and less risk of deflection. For normal windows and sliding doors up to about 3 metres, uPVC with steel reinforcement inside the profile is strong enough. Security does not depend on the material but on the hardware and glass: both can be supplied with SKG** or SKG*** locks, mushroom-head cams and laminated glass for the Police Quality Mark Secure Housing.
Sustainability
Both materials are recyclable. European uPVC window makers recycle old frames into new profiles through programmes such as VinylPlus, and aluminium can be recycled endlessly with a fraction of the original energy. Aluminium takes more energy to produce from new, uPVC is made from oil and salt. Over the whole lifespan, the energy you save on heating with well-insulated windows is much larger than the difference between the materials, so choose what fits your home and keep the old frames out of the incinerator: we dispose of them through a recycling channel.
Noise and condensation
For sound insulation the frame material matters less than the glass and the seals. Both uPVC and aluminium frames reach the same sound reduction when fitted with the same acoustic glass and three seals. For condensation it is different: an aluminium frame without a good thermal break gets cold in winter, and moisture can condense on the inside of the frame. Modern aluminium systems with a wide thermal break have largely solved this, but in bathrooms and kitchens without good ventilation a uPVC frame stays warmer to the touch.
Cost over 30 years
The purchase price is not the whole story. Over 30 years, this is roughly what a terraced house with six windows and two doors costs in each material, incl. VAT:
| Over 30 years | uPVC | Aluminium | Timber (for comparison) |
|---|---|---|---|
| Purchase and installation | lowest | about 30 to 60% higher | about 20 to 50% higher |
| Painting | none | none | every 6 to 8 years, often €1,500 to €3,000 per time |
| Hardware and seals | small parts after 15 to 25 years | same | same |
| Repairs to the frame | rare | rare | rot repairs likely |
| Heating savings vs old windows | same as aluminium, slightly better frame | same | same |
Because neither uPVC nor aluminium needs painting, both are usually cheaper than timber over the long run. Between the two, uPVC stays the cheaper option unless you need what aluminium does better.
Common myths
- "uPVC turns yellow." That was true for some profiles in the 1980s. Modern profiles are UV-stabilised, and coloured foils are tested for decades of sunlight.
- "Aluminium is always cold." Only old aluminium without a thermal break. Modern systems insulate well.
- "uPVC looks cheap." A Dutch block profile with a wood grain or matt anthracite foil is hard to tell from timber at a few metres.
- "Aluminium is maintenance-free, uPVC is not." Both need the same: cleaning, and a little oil on the hardware.
- "You cannot recycle uPVC." Old uPVC frames are recycled into new profiles through European take-back schemes.
Typical systems in the Netherlands
| System | Material | Depth | Typical use |
|---|---|---|---|
| Aluplast Ideal 4000 | uPVC | 70 mm | Budget windows, sheds, outbuildings |
| Aluplast Ideal 7000 NL | uPVC | 84 mm | Most Dutch homes, Dutch block frame (our Comfort) |
| Aluplast Ideal 8000 NL | uPVC | 94 mm | Triple glass, near zero energy homes (our Premium) |
| Reynaers SlimLine 38 | Aluminium | slim sash | Steel look, monuments and character homes |
| Reynaers MasterLine 8 | Aluminium | high insulation | Modern homes, large glass |
We supply all of these; the Aluplast profiles are our standard, the aluminium systems on request.
Questions to ask any supplier
- Which exact profile and system? Brand and type, not just the material.
- What is the Uw value of the whole window? Not only the glass.
- Is it a Dutch block frame? And does it fit your cavity wall and sill?
- Which hardware and security class? SKG** or SKG***, mushroom-head cams.
- Who measures and who installs? One party is responsible if something does not fit.
- What guarantee, on what? Frame, colour, glass, hardware and installation separately.
The Dutch block frame
Dutch homes have their own window type: the block frame (blokkozijn) with an inward-opening tilt and turn sash, fitted in the cavity wall. Make sure whichever material you choose comes in a Dutch version that fits the Dutch way of building, with the right frame depth, a sill and the right connection to the cavity. Our uPVC frames are Aluplast NL profiles made for the Dutch market, and our aluminium systems are supplied in Dutch configurations as well.
When to choose which
Choose uPVC when
- you want the best value per window and the best insulation for the money;
- your home is a typical Dutch house from 1930 to 2000 with block frames;
- you like a wood grain look or a classic Dutch style;
- the windows and doors are of normal size, up to about 3 metres wide.
Choose aluminium when
- you want very slim frames and as much glass as possible;
- you have very large panes or a sliding door of more than about 3 to 4 metres;
- the architecture is modern, or the building is a monument where only slim profiles are allowed;
- you want a specific RAL colour or a matt structured finish.
Mixing materials
You do not have to choose one material for the whole house. A common and sensible mix is uPVC windows everywhere plus an aluminium lift and slide door at the back where the opening is widest. Keep the outside colour the same, and the difference is hardly visible. We supply both, so the planning and installation stay in one hand.
Frequently asked questions
Are uPVC windows cheaper than aluminium?
Yes. For the same size and colour aluminium is usually about 30 to 60% more expensive. A uPVC tilt and turn window of 100 × 120 cm costs from €543 incl. VAT in our price list, aluminium tilt and turn windows start at €848.
Which insulates better, uPVC or aluminium?
A good uPVC frame insulates slightly better than a standard aluminium frame with a thermal break. With high-insulation aluminium systems the difference is small. The glass matters more than the frame.
Do aluminium windows last longer than uPVC?
Both last a long time without painting: uPVC about 40 to 50 years, aluminium 50 years or more. The hardware and seals wear first and can be replaced.
Is the ISDE subsidy the same for uPVC and aluminium?
Yes. The subsidy depends on the glass and the U-value, not on the frame material.
Can I combine uPVC windows with an aluminium sliding door?
Yes, that is a common choice. Keep the outside colour the same and the difference is hardly visible.
Which material is best for a Dutch house from the 1970s?
Usually uPVC in a Dutch block profile: it fits the style of the house, insulates very well and costs less.






