Eindhoven
Replacing windows in Eindhoven: costs, rules and tips for international owners

In short
- Eindhoven has a large international community around ASML, Philips, the High Tech Campus and TU/e, and many of them buy an older home that needs new windows.
- Most Eindhoven homes date from 1920 to 1985. For post-war houses uPVC frames in a Dutch block profile are usually the best value.
- Philipsdorp, the Witte Dorp and some other early 20th century areas are protected; there the look of the street facade is fixed and a permit can be needed.
- A terraced house with 6 windows and 2 doors costs about €15,000 installed; a semi-detached house with a sliding door about €21,500.
- We install from Waalwijk, about 45 minutes from Eindhoven, with quotes and support in English.
Eindhoven is the heart of Brainport, one of the most international regions in the Netherlands. Engineers and researchers at ASML in Veldhoven, Philips, NXP, the High Tech Campus and the university come from all over the world, and many of them end up buying a house in or around the city. A large part of those houses were built between the 1920s and the 1980s, and the windows are often the first thing to replace: draughty timber frames, old double glass that fogs up, and cold aluminium frames from the 1970s. This guide is about what is specific to Eindhoven. General prices, subsidy and glass are explained in our other guides; we link to them where useful.
Why Eindhoven homeowners replace windows
Eindhoven grew from a small town into a city of more than 240,000 people in about a century, largely because of Philips. That growth came in waves, and each wave left its own type of house and window:
| What you find | Why it matters now |
|---|---|
| Timber frames from the 1920s and 30s, repainted many times | Rot in sills and lower frames, small panes with single glass |
| Post-war timber or steel frames (1950s and 60s) | Draught, condensation, steel frames that rust and conduct cold |
| Early double glass from the 1970s and 80s | U-value around 2.8, three times the heat loss of HR++, failed seals that fog up |
| Uninsulated panels under the windows | Cold walls under every window, sometimes asbestos in older homes |
| Old sliding doors to the garden | Hard to open, poor locks, the coldest part of the house |
Many international buyers also plan a heat pump or want to get off gas. New frames with HR++ or triple glass are often the step that makes that possible, together with cavity wall and floor insulation.
Eindhoven homes and their windows
What works depends on when and where your house was built. Roughly:
| Period and area | Typical windows | What usually works |
|---|---|---|
| 1910 to 1940: Philipsdorp, Witte Dorp, parts of Stratum, Gestel and Strijp | Timber frames with top lights and small panes, characteristic colours | Timber or uPVC with the same division and colour; protected areas need extra care |
| 1945 to 1970: Woensel, Tongelre, Kruidenbuurt, parts of Gestel | Wide timber frames, large panes, simple divisions, steel in some blocks | uPVC in a Dutch block profile, usually permit-free |
| 1970 to 1990: Woensel-Noord, Achtse Barrier, Herpen | Timber or aluminium frames, panels under windows, sliding doors at the back | uPVC with insulated panels, a new tilt and slide door |
| 1990 to now: Meerhoven, Blixembosch, Strijp-S | Insulated uPVC or aluminium frames | Glass upgrades, new doors, fly screens; lofts in Strijp-S via the VvE |
| Surroundings: Veldhoven, Best, Son en Breugel, Waalre, Nuenen | Mostly post-war and 1970s family homes | uPVC frames, sliding doors, often a whole house at once |
Philipsdorp, Witte Dorp and other protected areas
Philipsdorp was built by Philips from 1910 onwards as a garden village for its workers, and the Witte Dorp followed in the 1930s. Both are now protected for their historic character, as are several other early 20th century streets and individual monuments. In these areas the municipality wants the street view to stay as it was designed, and the windows are a big part of that look.
- Division and proportions: the new windows should have the same division, top lights and proportions as the originals.
- Colour: many of these houses have a specific colour scheme for frames and doors. Keep it, or check what is allowed.
- Material: timber is often the safe choice on street facades. uPVC with a wood grain finish and the right division is sometimes accepted, but check first.
- Glazing bars: where the originals have small panes, use real glazing bars on the glass, not a grid between the panes.
- Rear facades: usually more freedom, as long as they are not visible from public space.
Check your address in the Omgevingsloket permit check before you order. If you need a permit, we supply drawings and a specification for the application.
What we usually advise
For most Eindhoven houses built after 1945 we advise uPVC frames in a Dutch block profile:
- Profile: Aluplast Ideal 7000 NL (84 mm, our Comfort range) for most homes, or Ideal 8000 NL (94 mm, Premium) with triple glass if you plan a heat pump.
- Glass: HR++ as standard, triple where the subsidy makes it cheaper per saldo, which with new frames is often the case.
- Colour: white, cream or anthracite grey outside; white inside is the most common choice.
- Ventilation: self-regulating trickle vents in bedrooms and the living room, because new frames are much more airtight.
- Panels: insulated uPVC panels instead of the old panels under the windows.
Prefer slim aluminium for a modern look or very large glass? That is possible too; the differences are in uPVC or aluminium windows.
Airport and ring road noise
Eindhoven Airport lies on the west side of the city, next to Meerhoven and Veldhoven, and the A2 and A67 run around the city. For homes near the flight paths or the ring road, noise is worth taking into account when choosing glass:
| Glass | Typical sound reduction (Rw) | When we advise it |
|---|---|---|
| Standard HR++ (4/16/4) | about 30 to 32 dB | Quiet streets |
| Triple glass (4/18/4/18/4) | about 32 to 34 dB | Most homes, also for insulation |
| Acoustic HR++ or triple with laminated or thicker panes | about 36 to 42 dB | Bedrooms facing the ring road, a main road or a flight path |
Every 3 dB extra is a clear step; 10 dB feels like half the noise. Well-sealed frames with three seals, such as our Comfort and Premium ranges, help as much as the glass. Tell us at the quote stage if noise is a concern.
Sliding doors and garden doors
Many Eindhoven terraced and semi-detached houses from the 1960s to 80s have an old sliding door to the garden. Replacing it gives the biggest jump in comfort and security:
| Door | From incl. VAT | Good for |
|---|---|---|
| uPVC tilt and slide door | €2,408 | Most terraced houses, opening up to about 3 m |
| uPVC lift and slide door, triple glass | €3,896 | Wide openings, low threshold, best insulation |
| uPVC French doors | €2,858 | Classic look, opening the whole width |
| uPVC back door with glass | €1,812 | Side entrances and utility rooms |
Installation of a sliding door is €2,171.95 incl. VAT. More on our sliding doors and French doors pages.
Permits and the VvE
Outside protected areas, replacing windows in the same opening with a similar look is usually permit-free in Eindhoven. You do need a permit for listed buildings, often for street facades in protected areas, and usually when you change the size of an opening or turn a window into a door at the front. Own an apartment, for example a loft in Strijp-S or a flat in Woensel? Then the owners association usually has to approve first. The steps are in replacing windows in an apartment.
What it costs in Eindhoven
Our prices for typical Eindhoven homes, incl. 21% VAT, white, HR++ glass, Comfort range. Installation in Eindhoven is included at our normal rates; there is no travel surcharge.
| Home | Windows and doors | Installation | Total |
|---|---|---|---|
| Apartment, 4 windows | €3,153 | €2,783 | €5,936 |
| Terraced house, 6 windows and 2 doors | €8,186 | €6,824 | €15,010 |
| Semi-detached, 9 windows, front door and sliding door | €11,701 | €9,759 | €21,460 |
A single uPVC tilt and turn window of 100 × 120 cm costs €619 in Comfort and €655 in Premium with triple glass, plus €695.75 for installation. Colour on the outside adds about 10 to 15%. Plastering and painting inside are not included. The full price list is on our prices page, and more examples are in what new windows cost.
Subsidy and glass
If you own and live in the house and pay for the windows yourself, you can claim the national ISDE subsidy: €111 per m² for triple glass in new frames, €25 for HR++, from 3 m². Nationality does not matter. You apply after installation with our invoice and the glass specification. All conditions are in the ISDE guide, and the choice of glass in HR++ or triple glazing. Ask the municipality as well whether a local energy loan is available for your home; such schemes change from year to year.
Tips for international owners
- Get everything in English. Our quotes, specifications and invoices can be in English, so you know exactly what you sign.
- Learn five Dutch words. Kozijn (frame), draaikiepraam (tilt and turn window), stelkozijn (sub-frame), dagmaat (opening size), borstwering (panel or wall under the window). The rest is in our glossary.
- Bought recently? Check the building inspection report: it often lists the condition of the frames and whether there is asbestos.
- Plan around work and school. Installation takes a day or two and someone needs to be home. Many families plan it in a holiday week.
- Keep the paperwork. The invoice and glass specification are needed for the subsidy and add value when you sell.
- Relocating again later? New windows improve the energy label, which helps the sale or rental of the house.
Comparing quotes
| Check | What to look for |
|---|---|
| Profile | Brand and type, for example Aluplast Ideal 7000 NL, not just a number of chambers |
| Glass | Ug value (1.1 for HR++, 0.5 to 0.7 for triple), warm edge spacer, acoustic or laminated where needed |
| Ventilation | Trickle vents included where needed |
| Installation | Measuring, removing and disposing of old frames, insulating, sealing and finishing strips inside |
| Panels and sills | Are the panels under the windows and the window sills included? |
| Extras | Scaffolding, crane, asbestos inventory: included, on request or excluded? |
| Guarantee | On the product and on the installation, and who you call |
A cheaper quote often leaves out installation details, panels or ventilation. Compare the total for the same scope.
How it works with us
| Step | What happens |
|---|---|
| 1. Photos and sizes | Send photos and approximate sizes; you get a quote in English within one working day |
| 2. Measuring | We measure on site in Eindhoven and finalise layout, glass, colour and ventilation |
| 3. Order | You approve and pay a 50% deposit; we order from the factory |
| 4. Production | 2 to 6 weeks |
| 5. Installation | Usually 1 to 2 days for a house, including removing and disposing of the old frames |
| 6. Handover | We check everything with you; the remaining 50% is paid after installation |
Frequently asked questions
What do new windows cost in Eindhoven?
A uPVC tilt and turn window of 100 × 120 cm costs €619 incl. VAT plus €695.75 installation. A terraced house with 6 windows and 2 doors costs about €15,000 installed.
Do I need a permit for new windows in Eindhoven?
Usually not when you replace windows in the same opening with a similar look outside protected areas. In Philipsdorp, the Witte Dorp and other protected areas, and for listed buildings, a permit can be needed. Check the Omgevingsloket.
Can I put uPVC windows in Philipsdorp?
Sometimes, if the division, proportions and colour match the original design and the municipality accepts it. Timber is the safer choice on street facades. Check before you order.
Do you install in Eindhoven and Veldhoven?
Yes. We install in Eindhoven, Veldhoven, Best, Son en Breugel, Waalre, Nuenen and the rest of the region, with quotes and support in English.
Can I get subsidy as an expat?
Yes, if you own the house, live in it and pay for the windows yourself. Nationality does not matter.
How long does it take?
A quote within one working day, measuring within one to two weeks, 2 to 6 weeks of production and usually one or two days to install a house.






